DETERMINATION OF THE LONGITUDINAL DISTANCE BETWEEN FURROWS OF MODULAR PLOUGH AGGREGATED WITH HIGH-POWER TRACTORS

A. N. Khudoyarov; R. Yu. Makhmudov; M. A. Yuldasheva; B. A. Kadirov, U. Abdullaeva

Authors

A. N. Khudoyarov Professor
R. Yu. Makhmudov
M. A. Yuldasheva PhD
B. A. Kadirov, U. Abdullaeva Master’s Degree, Andijan Institute of Agriculture and Agrotechnologies

Keywords:

High-power tractor, aggregate, modular plough, furrow, longitudinal distance, research, result, double-layer plough, plough, resource-efficient, technology, structural scheme, plough-turning surface

Abstract

The article presents the results of the research on determining the longitudinal distance between the modular plough furrows that are aggregated with high-power tractors. In addition to two-tier ploughs, modular ploughs for general purposes are widely used in our Republic, but these ploughs are imported from foreign countries, and it has been determined that they do not fully meet the requirements for plowing land in the conditions of our Republic. Based on this, modular ploughs designed for general work have been developed for high-powered wheeled tractors widely used in our country. According to the results of the research, the longitudinal distance between plug furrows intended for general work is less than 88 cm. has been determined.

References

Anvarjon Narirjonovich Khudoyorov, Matlubakhon Ashuraliyevna Yuldasheva. RESULTS OF THE RESEARCH PERFORMED ON SUBSTANTIATE SIZE OF COMBINED AGGREGATE SOFTENER . // RECENT SCIENTIFIC INVESTIGATION //. pp . 80-85. 2020 . 2. AN Khudoyorov, MA Yuldashev, D Khudoynazarov. The combined unit for preparation of the soil for cultivation of saplings of ornamental trees . // Cited: 2 // 2019. 3. A N Hudayarov, M Mamadaliyev, M Yuldasheva, R Muradov. Motivation of the geometric form of looseners working surface of multifunction unit European science review Austria, Vienna November . // Decembe// Number 11-12. p.138 . 2020.

Tokhtakoziev A., Imamkulov Q.B. Scientific and technical basis of soil deformation and decomposition with low energy consumption. - Tashkent, 2013. - 120 p.

Tokhtakoziev A., Mansurov M.T., Rasuljanov A.R. Scientific and technical solutions for ensuring the stability of the working depth of soil tillage machines whose working bodies are permanently attached to the frame . - Tashkent: Muhr Press, 2019. - 70 p.

Tukhtakuziev A., Khushvagov B., Makhmudov R.Yu. Theoretical prerequisites for the substantiation of parameters for the general purpose of the plow // Republican scientific practical conference on the topic of advanced technologies in agriculture Andijon (book 2) - Andijon, 2002. - P. 80-84.

Tukhtakuziev A., Makhmudov R.Yu. The determination of the width of the grip of the hull of the plow // Fargona Polytechnic Institute Journal of Science and Technology. - Ferghana, 2002. - №2. - B. 91-93.